quarter turn latch with thumb turn knob plug
- Knob rotates 90 degrees, in either clockwise or counterclockwise direction.
- Knobs style quarter turns are easy to operate, making them ideal for multi-point latching.
- Our quarter turn latches are intended for Nema 4 or Nema 12 enclosure requirements.
- Handle has a 10.00mm padlockable hole for when additional security is required.
- This quarter turn latch works with any of SPEP's cams with 8.00mm square cut outs.
Additional information
| Weight | 0.286 lbs |
|---|---|
| Material | Die Cast Zinc |
| Plug Material | |
| Finish | Chrome Plated, Polished |
| Housing Material | |
| Type | |
| Plug Finish | |
| Housing Finish | |
| Industry | Enclosures/Electrical Enclosures, Enclosures/Switchgear |
- Knob rotates 90 degrees, in either clockwise or counterclockwise direction.
- Knobs style quarter turns are easy to operate, making them ideal for multi-point latching.
- Our quarter turn latches are intended for Nema 4 or Nema 12 enclosure requirements.
- Handle has a 10.00mm padlockable hole for when additional security is required.
- This quarter turn latch works with any of SPEP's cams with 8.00mm square cut outs.
You must be logged in to post a review.
Related products
-
12C2 single point cam for quarter turn latch, offset out
Steel | Zinc PlatedTypeCams and AccessoriesOffset Type -
14 quarter turn latch with square insertDie Cast Zinc | Chrome Plated, PolishedPlug MaterialDie Cast ZincHousing MaterialDie Cast ZincTypeQuarter TurnPlug FinishChrome Plated, PolishedHousing FinishChrome Plated, Polished
-
12C3 single point cam for quarter turn latch, offset outSteel | Zinc PlatedTypeCams and AccessoriesOffset Type
-
12C12 single point cam for quarter turn latch, offset outSteel | Zinc PlatedTypeCams and AccessoriesOffset Type
-
12C4 single point cam for quarter turn latch, straightSteel | Zinc PlatedTypeCams and AccessoriesOffset Type
COMMONLY USED WITH
-
12C22 single point cam for quarter turn latch, offset outSteel | Zinc PlatedTypeCams and AccessoriesOffset Type
-
177P-04 small print pocketPolystyrene | Gray, ANSI 61SizeSmallDouble Sided TapeWithout Tape
-
T122-10 oil tight hole sealSteel | Powder Coat, ANSI 61 Textured GrayOIL TIGHT SEAL, 1-1/2" CONDUIT HOLES, STEEL, TEXTURE GREY POWDER COATED
-
E215ZN shoulder eye boltSteel | Zinc PlatedTypeShoulder Pattern
Reviews
There are no reviews yet.