quarter turn latch with padlockable thumb turn knob plug
- Padlockable wing knob accepts padlock with shackle of up to 3/8" diameter.
- Wing knob rotates 90 degrees, in either clockwise or counterclockwise direction.
- When a padlock is installed, the wing will not rotate. Padlock must be removed to activate latch.
- Our quarter turn latches are intended for Nema 4 or Nema 12 enclosure requirements.
- Fixed Grip type quarter cam latches are commonly used in HVAC, electronic and transportation industries to name a few.
Additional information
| Weight | 0.255 lbs |
|---|---|
| Material | Die Cast Zinc |
| Housing Material | |
| Finish | Powder Coat, Black Textured |
| Type | |
| Housing Finish | |
| Industry | Enclosures/Electrical Enclosures, Enclosures/Switchgear |
- Padlockable wing knob accepts padlock with shackle of up to 3/8" diameter.
- Wing knob rotates 90 degrees, in either clockwise or counterclockwise direction.
- When a padlock is installed, the wing will not rotate. Padlock must be removed to activate latch.
- Our quarter turn latches are intended for Nema 4 or Nema 12 enclosure requirements.
- Fixed Grip type quarter cam latches are commonly used in HVAC, electronic and transportation industries to name a few.
You must be logged in to post a review.
Related products
-
12C5 single point cam for quarter turn latch, offset out
Steel | Zinc PlatedOffset TypeTypeCams and Accessories -
12C2 single point cam for quarter turn latch, offset outSteel | Zinc PlatedOffset TypeTypeCams and Accessories
-
12C9 single point cam hook cam for quarter turn latchesSteel | Zinc PlatedOffset TypeTypeCams and Accessories
-
12C8 single point cam for quarter turn latch, straightSteel | Zinc PlatedOffset TypeTypeCams and Accessories
-
41-00 quarter turn latch with slotted arrow plugDie Cast Zinc | Chrome Plated, PolishedPlug MaterialDie Cast ZincHousing MaterialDie Cast ZincPlug FinishChrome Plated, PolishedTypeQuarter TurnHousing FinishChrome Plated, Polished
COMMONLY USED WITH
-
E233 shoulder eye boltSteel, Forged | MillTypeShoulder Pattern
-
GE1LH1 nema / jic enclosure latchDie Cast Zinc | Zinc PlatedTypeLocks
-
12C32SS single point cam for quarter turn latch, offset outStainless Steel | PassivatedOffset TypeTypeCams and Accessories
-
T112-07 oil tight hole seal
Steel | Textured Powder Coated GrayOIL TIGHT SEAL, STANDARD PUSH BUTTON, STEEL, RAL 7035 TEXTURED POWDER COATED, ZINC PLATED CAP, INDIVIDUALLY POLYBAGGED
Reviews
There are no reviews yet.