Tie Downs
Sierra Pacific Engineering and Products (SPEP) is an industry-leading supplier and manufacturer of a vast array of tie downs and tie down hardware. Our products are suitable for any need and are vital to OEMs across the country for use in many applications in every industry. A tie down is a hardware component made to be easily secured to rope, chains, or strapped to a trailer or towing surface. They are versatile and created to secure your cargo needs.
SPEP brings decades of experience to industries requiring high-quality industrial hardware products like tie downs and accessories. Our product catalog contains thousands of products that are available around the globe.
RECOMMENDED PRODUCTS
Forged Lashing Ring
867
Steel / Mill
Recessed Tie Down
890ZN-01
Steel / Zinc Plated
Medium Chain Retainer
D388
Steel / Mill
Rope Ring
880SS-02
Stainless Steel / Tumbled Deburred
MORE ABOUT THIS SECTION
Safety Information
Load capacities are based upon static tensile pull testing under controlled laboratory conditions at room temperature and when the product is new. Unusual conditions such as extreme high and low temperatures, chemical exposure, constant exposure to salt water, placement along sharp edges, etc. need to be considered in product selection and may necessitate a reduction of rated load capacities.
Ultimate Breaking Strength (UBS), also known as Minimum Breaking Strength (MBS), Minimum Breaking Load (MBL), Breaking Load Capacity (BLC), Breaking Strength Capacity (BSC) or Rated Load Capacity (RLC), is the load a complete assembly can withstand before failure. Do not use Ultimate Breaking Strength (UBS) as a criterion for service or design purposes. Refer to the Working Load Limit (WLL).
Working Load Limit (WLL) is the maximum load which should ever be applied to a product under normal usage. Safety factor is the ratio between the Ultimate Breaking Strength (UBS) and the Working Load Limit (WLL). The minimum acceptable safety factor for any application is 3 [Working Load Limit (WLL) 1/3 of the Ultimate Breaking Strength (UBS)] but can often be 4 or greater depending on the circumstances. Ratings are generally established and/or regulated by local, state, federal, industrial, and/or trade association legislative standards and may vary from industry to industry (ex: DOT, CVSA/FHWA, CHP, Federal Motor Carrier Safety Regulations 49CFR39.102).
Tie downs are not designed to be used as a lifting device. A tie down system is only as strong as its weakest link. For adequate safety protection, components attached to the product must be of equal or greater strength. The mounting location must be capable of supporting at least 15% more than the Ultimate Breaking Strength (UBS) of the rated component. Unless otherwise specified, avoid side loading. Load should be applied uniformly as a straight line pull only. Load direction other than straight may result in a significant reduction in rated load capacities.
It is the user’s responsibility to determine suitability of a product for any particular use (including but not limited to amount, type, capacity, and location of tie down assemblies) with the information that is provided in this catalog. Alterations, age, wear, and/or damage to any tie down system can reduce its capacity rating. All products should be inspected on a regular basis. Any worn, deformed, mis-used or overloaded products should be replaced immediately.
Tie Down Engineering
As a global leader in the industry, we design, manufacture, and supply everything from recessed tie downs and chain retainers to forged lashing rings and more. At Sierra Pacific Engineering and Products, we know that quality matters when it comes to cargo control.
All of our products are durable enough to perform in any application. They are appropriate for use in a variety of applications, including securing cargo to flatbeds, service trucks, RVs, and trailers. These tie downs are simple hardware components used to easily attach straps, ropes, or chains to towing surfaces.
Industrial Tie Down Suppliers
SPEP carries a wide variety of styles of tie downs, with models capable of withstanding up to 25,000-pound loads. Our tie downs provide ample strength for just about any cargo control need.
Since every need is different and every application requires a suitable solution, we offer the most expansive variety of tie downs available. Our tie-down anchors are brackets available in several different materials that attach to any surface. Our D-ring tie downs use D-rings that are available in different sizes for a variety of attachment methods.
Custom Manufactured Tie Downs
Some of the tie down products and hardware accessories we offer include utility trailer tie down rings, bolt-on tie down rings, cargo tie down rings, flush mount tie downs, surface mount, trailer and lashing tie downs, steel tie down rings, stainless steel tie down rings, and more.
Hooks, points, ratchets, and cam buckles all offer a flexible and broad range of applications, and each has its advantages and strengths. Our products are available in various finishes, some of which are zinc plated, mill, stainless steel, passivated, and electropolished.
Since we understand the need for the perfect tie down, Sierra Pacific Engineering and Products offers customized services that include off-tool sampling, design, engineering, prototyping, and manufacturing services.
Getting the right combination of hardware and accessories for the job is paramount, especially when it comes to safety and security. Regardless of which types of tie downs you need, know that all of ours are engineered for reliable security and industrial strength.
Why Choose SPEP as Your Tie Down Supplier?
Every product we manufacture is held to a higher standard of quality than other competitors. Our tie downs are forged from superior materials using the latest technology and advanced methods.
These tie downs and accessories are key components for any project that requires cargo to be secured reliably the first time, and every time. Only SPEP offers the supply chain expertise, low pricing, and customer service to give you the peace of mind you deserve.
Our expert engineering, cutting-edge manufacturing, and innovative designs provide our customers with tie downs and accessories that surpass industry standards. Our standards match the Department of Transportation. We are an ISO 9001-certified company. Contact SPEP today and let us provide what you need for your projects and products.